Must know: steps to renovate solid wood flooring
It took a lot of money to lay the solid wood floor at home. After a long time, the surface brilliance is no longer, and it is reluctant to change. How to make it wash your face and make it shine? Renovating the floor can make the floor look new. So what are the main steps in the renovation of solid wood flooring? Let's take a look at it! 1. Use large-scale floor refurbishing machinery to remove the lacquer layer, surface layer and wood layer by about 0.5 mm. After careful sanding, the surface of the floor is fine and smooth to a new state. The corners of the floor are sanded using a small angle grinder for overall smoothing. 2. Remove the original side seam transparent putty, re-sealing the seam, and then seal the entire floor with primer and dry. 3. After the primer is dry, brush the first coat and wait until dry. 4, carefully grind with water gauze until the surface layer is slightly rough, remove the dust, brush the second layer of paint. 5. Brush the paint three to four times according to the above procedure. The last pass does not need to be ground. 6. After the last coat is completely dry, put on the floor wax. LED Light Pad, tracing light pad, light box for tracing, tracing light board A5 Led Light Pad,Tracing Light Pad,Light Box For Tracing,Tracing Light Board Guangdong Jishengke Industrial Co., Ltd. , https://www.suronart.com