Induction swing gate working principle and function debugging process
Brass fasteners are used for their physical and aesthetic properties. Brass is utilized due to its high thermal conductivity and corrosion resistant properties, it is suitable for use in hot and cold environments, and resistant to water corrosion, making it a staple of industries such as heating and plumbing. Brass fasteners are largely non-magnetic (like any fastener, slight magnetic properties can develop during the manufacturing process) and resistant to tarnishing. Brass Nut,Adjustable Brass Nut,Brass Strat Nut,Brass Cap Nut Taizhou Hongchuang Hardware Co., Ltd. , https://www.taizhouhongchuang.com
Second, high-end applications require a very high level of appearance for the gates and require a very strong viewability. The plasticity of the appearance of the swing gate is the strongest among all the gates. The material types of the blocker are various, and the shape of the box is also diversified. It is easy to design a beautiful high-end shape according to the specifications of the site. Therefore, swing gates are often used in office buildings, smart buildings, clubs and other high-end applications. In addition, the swing gate operates at a high speed, and the safety performance is also very good, fully meeting the needs of high-end venues.
Induction swing gate system working principle 1) If a pedestrian forgets to read a card or read an invalid card to enter the channel, the system will prohibit pedestrians (for the normally open mode, the gate will be closed; normally closed mode, the gate does not move;), and an alarm will be issued Until the pedestrian exits the aisle, the alarm is disarmed; read the valid card again to allow the passage.
2) Turn on the power and the system enters the working state after 3 seconds.
3) The main control board receives the signals of the card reader and infrared sensor, and after comprehensive processing, sends an effective control signal to the direction indicator and the motor, so that the direction indicator changes to the green arrow access indicator, if the system is in normal condition In closed mode, the motor runs, the limit switch controls the motor rotation angle, and the gate opens (in the normally open mode, the motor does not act), allowing pedestrians to pass.
4) After the pedestrian indicates the passage of the channel according to the direction indicator mark, the swinging infrared sensor senses the whole course of the pedestrian passing through the channel, and continuously sends a signal to the main control board until the pedestrian has completely passed the channel.
5) When the card reader reads a valid card, the beeper will emit a sweet sound, prompting the pedestrian to read the card successfully; at the same time, the information read from the card will be judged and processed, and an application pass signal will be sent to the main control board. .
Induction swing gate function debugging 1, swing gate external feed card signal, outgoing card signal;
2. When there is no credit card signal, when the pedestrian enters from the entrance to the alarm; Similarly, when the card is not swiped, when the pedestrian enters from the entrance to the alarm; (Note: There is no single set of alarm function when the pair of swing gate is used)
3. Pedestrian brushing cartoon line: delaying the opening of the swing gate; the gate will be closed when the pedestrian passes within the set pass time; if the pedestrian does not pass the time, the gate will be closed;
4. When a pedestrian passes a gate, if the two are too close to one another, the time limit is used as one.
5, swing switch speed is adjustable. See parameter settings.
Brass fasteners are suited for some marine environments, including brackish water and slow current sea water; brass in this environment develops a protective green coating. Brass fasteners are also commonly used with wood applications, as the golden coloring blends well with the tan wood. Brass is a softer metal and must be used with care, always drilling pilot holes and using driver bits that fit the head of the screw precisely to prevent stripping. Brass Bolts also require a pilot hole be driven before installtion.