Detailed TSI engine with tiered injection function (4)
The Volkswagen FSI engine uses in-cylinder direct injection technology, which subverts the tradition of mixing oil and gas into the engine for combustion. It can inject fuel directly into the engine cylinder as needed and can achieve stratified injection. The Volkswagen 1.8-liter TSI engine, which is produced and sold domestically, does not have a stratified injection function, but is a typical in-cylinder direct injection. The FSI engine without stratified injection retains the “uniform injection†mode of operation, which means that the engine performs uniform injection in the cylinder regardless of low or high load conditions. In fact, stratified injection is actually an engine lean-burning technology. At low load, the Volkswagen FSI engine is half-open, and the fuel system injects fuel into the engine's compression stroke. The special piston top design creates a tumble of the inhaled air and the injected fuel, forming a theoretical space only around the spark plug. The fuel-burning air-fuel mixture is sufficient to ignite the mixture in the entire combustion chamber; and elsewhere in the combustion chamber is a thin mixture of air-rich gas to form a lean combustion. However, the Volkswagen 1.8-liter TSI engine produced and sold domestically does not have a stratified injection function, but a typical in-cylinder direct injection. The FSI engine without stratified injection retains the “uniform injection†mode of operation, which means that the engine will perform uniform injection in the cylinder regardless of low load or high load conditions, but the injection quantity is still accurate according to the intake air volume. Controlled (the characteristics of the GDI direct injection engine) to ensure the original high power output and torque and achieve lower fuel consumption. However, due to the lack of stratified injection function, the fuel consumption of the domestic version of the FSI engine during operation will be higher than that of the engine with this function. This is not good news for users in big cities with poor traffic conditions. Previous page next page
1000W LED Grow Light Bar Description
1000W LED Grow Light Bar is our new product, The whole light photon flux up to 2800 μmol/s. Lamp Efficacy up to 2.7 μmol/J. Make with Full Spectrum add deep red light which make growers get higher yields. The LED Grow Light Bars is high quality product. LED chip we chose Samsung LM301B/LM301H and OSRAM red light, The whole light photon flux up to 2800 μmol/s. Lamp Efficacy up to 2.7 μmol/J. With higher efficacy and higher PPFD. Full spectrum is best for all stages of plants. 1000W LED Grow Light is best solution for big commerical medical plants.
LED Grow Light Bar Features
DIMMABLE LED GROW LIGHT
IP65 Waterproof
LED Grow Light Bar Data Sheet
Our Office and Production Line
led grow light 1200w,led grow light 1000w,led grow light 1000w for plants Shenzhen Zhenyang Century Technology Co.,Ltd , https://www.growlightzy.com
Customized 600W / 800W /1000W
Efficacy up to 2.7 μmol/J
Light Source: Samsung 3030 & OSRAM 3535
Full Spectrum + 660nm
Dimmable: 0-10V Dimming, Knob Dimming
3 Years Warranty
Product Name
1000W LED Grow Light Bar
Model Number
ZYSJ-BZ1000
Wattage
1000W
PPF
2700 μmol/s
Efficacy (PPE )
2.7 μmol/J
Input Voltage
100-277VAC 50/60HZ
LED Brand
Samung LM301B/LM301H + OSRAM
Color
Full Spectrum + 660nm
Driver Brand
MeanWell Driver
Lamp Size
1500x1180x70mm
Material
Aluminum
IP Rating
IP65
Lifespan
50,000 Hours
Certificate
ETL, FCC, CE, RoHS
LED Grow Light Bar Product Pictures