How to connect the solvent oil alarm to the fire fighting system
Non-Wonven Polishing Wheel,Non Woven Steel Polishing Wheel,Buffing Wheel For Drill,Aluminum Polishing Kit Jiangmen Gude Polishing Equipment Co., Ltd , https://www.kokipolishing.com
In the solvent oil project, which components are required for the detection of combustible gas alarms
Solvent oil is a complex mixture of hydrocarbons that is extremely flammable and explosive. Aromatic hydrocarbons such as benzene, toluene, xylene and other combustible gases will be produced, and combustible gas alarms must be installed on site for constant monitoring.
Solvent oil alarm can effectively detect the concentration of combustible gas and prevent the concentration of combustible gas from exceeding the standard after gas leakage. The combustible gas alarm is composed of a gas alarm controller and a gas detector. The controller can be placed in the duty room, which mainly controls each monitoring point. The combustible gas detector is installed in a place where gas is easy to leak. The core component is a built-in gas sensor, and the combustible gas sensor detects the concentration of combustible gas in the air. The gas detector converts the combustible gas concentration detected by the sensor into an electrical signal and transmits it to the controller through the cable. The higher the combustible gas concentration, the stronger the electrical signal. When the gas concentration reaches or exceeds the alarm point set by the gas alarm controller , The gas alarm controller sends out an alarm signal, and can activate external devices such as solenoid valves and exhaust fans to automatically eliminate hidden dangers.