Expansion and pre-buried effect - Guangdong three-in-one connector - Tuochen Hardware
Three-in-one connectors are widely used in today's panel furniture to function as a combination panel. According to the different needs of the market, the following two-in-one connector, four-in-one connector, combination nut, strong connector and other combinations of connector styles have been derived. There is doubt in the office here, what kind of Guangdong three-in-one connector is needed? Today we will give an example. First of all, in the daily plate furniture application, the two-in-one connector (also known as the two-in-one plate support) and the Guangdong three-in-one connector are the two most commonly used connectors. The difference is the Guangdong three-in-one connector machine. The ribbon expands the embedded nut, and the two-in-one connector is self-tapping without pre-buried. The difference between the two is the difference in the type of wood used in your furniture. Both the MDF and the MDF are processed plates, which have a wide application range. The characteristics are that the surface is smooth and even, and the density is uniform. However, the internal base is soft, the material is not rough enough, and the nail holding force is not enough, which is not suitable for multiple disassembly and assembly. Like this, we generally use the Guangdong three-in-one connector for assembly. After the expansion is embedded and inserted into the board, the grabbing force is increased, the combination is more stable, and the nail holding force can be maintained after repeated disassembly and assembly. The particle board is made of wood chips, shavings, wood silk, sawdust and other materials. The combination of chips, strips, needles and granules makes the internal structure cross-disorder. This kind of wood board has strong nail holding power and can be assembled in time without expansion and pre-buried. However, the edge of the board is rough and easy to get wet. Therefore, when selecting the connecting screw, we should use the plastic-coated screw rod (that is, the plastic rod) to improve the moisture-proof ability and ensure normal use in a humid environment. There are many kinds of wood boards for solid wood boards. Nowadays, several materials commonly used in solid wood furniture in the furniture market are pine wood, rubber wood, birch, oak, cherry wood and so on. Among them, pine and cedar are soft in texture and are used to make children's furniture. They can be assembled with Guangdong three-in-one connector. Because of its low price and hard texture, rubber wood is widely used, but most of them are traditional joints such as rivets, nails and enamel. Having said that, I believe that everyone has a basic understanding of what kind of wood is suitable for Guangdong three-in-one connector. The furniture hardware knowledge is shared. I am the red scarf of Tuochen Hardware. I hope everyone can help this article. . Http://news.chinawj.com.cn Monel alloy 400 has a specific gravity of 8.80,[5] a melting range of 1300-1350 °C, an electrical conductivity of approximately 34% IACS, and (in the annealed state) a hardness of 65 Rockwell B. Monel alloy 400 is notable for its toughness, which is maintained over a considerable range of temperatures. Monel Flange,Monel Blind Flange ,Monel Weld Neck Flanges,Monel K500 Flanges Zhejiang Max Stainless Steel Co.,Ltd , https://www.cnstainlesstube.com