Winter decoration should keep in mind "four things"


Mr. Li purchased a second-hand house in the middle of this year. He intends to renovate it as soon as possible, and will be able to move to a new home in the next year. All sorts of formalities can be completed. Together with the home improvement company and private construction team, the construction started in mid-October. Now that it has entered November, the decoration issue has not yet fully unfolded. Another news came that heating may be ahead of schedule this year. The temperature has turned sharply. In the face of the embarrassing situation of construction in winter, Mr. Li has many concerns.

Not only did Mr. Li face such a situation, but I learned that the current situation of home improvement companies is quite good. Even some foremen consider both the site and the site, indicating that many homeowners are facing problems of winter decoration. The annual house-building season has spurred the winter construction this year, and Xiao Bian will interpret winter decoration notices for you.

For the problems that winter construction may face, the author conveyed Mr. Li’s concern that Wang, a decoration company in Dezhou City, summed up the four points of attention for the owners of the winter decoration. Manager Wang said that one of the most important prerequisites for winter construction is that the indoor temperature should always be maintained at minus 5 degrees Celsius. Otherwise, the construction quality will be greatly affected. At the same time, the following issues must be noted:

Precautions: Use glue to ensure the temperature allows the glue to dry quickly without delay

When decorating, there may be many places where glue is used. Ceilings, walls, interior decorations... These things are inevitably used in the construction process. Some special parts may also use a lot of glue. Manager Wang said that if the temperature is too low, even if the glue does not fail, there is still adhesion, but it is slow to dry, affecting the construction process and is likely to slow down the progress of the later period. Therefore, it is very necessary to keep the normal state of the glue and a room temperature of 5 degrees Celsius above zero. At the same time, glue contains almost all chemical components, and it dries slowly and slowly, affecting indoor air quality.

Matters needing attention two: Use the cement to add the antifreeze agent or maintains the suitable temperature to guarantee its strength

Tiling is an important project in the renovation of a house. Cement is used for tiling. The application of cement is also stressful. During winter construction, the cement that has been agitated may become ineffective once cooled. In addition, the more serious is that after the bricks have been attached, the sudden drop in temperature will seriously affect the strength of the cement and threaten the quality of the project. Moreover, the low temperature will increase the solidification time of the cement, which is unprofitable in the construction period.

Manager Wang said: “When using cement, be sure to pay attention to insulation, especially if the bricks are plastered and the temperature drops suddenly. It is most likely to affect the strength of cement.” He suggested that cement should be given to cement during winter construction. Add antifreeze to protect construction quality. When the villa's terrace is tiled, it must be covered with a layer of external insulation material to achieve double insurance.

Matters needing attention three: Uses the paint paint brush most not to be able to avoid the dry brush that two times will crack from the skin

The paint has the highest moisture content and is therefore the most deeply affected by temperature. Paint brush three times, a layer of primer, two layers of paint, in the process, the most taboo on the first layer did not dry to start brushing a layer. In winter, the temperature is low, the water evaporates slowly, and the paint naturally slows down. At this time, it is very likely that in order to grab a period of time, a layer of paint will be applied if the upper layer is not dried.

Manager Wang said that once there is a phenomenon in which the upper layer is not dried and the next layer is brushed, it is very likely that after the heating, the temperature suddenly rises and the temperature difference between the front and rear is too large, resulting in wall peeling, blistering and even cracking. . “In order to avoid this phenomenon, pay attention to the room temperature when painting, and let the upper layer of paint pass through the film and then brush it again the second time. Do not influence the construction quality in order to grab the construction period.”

Matters needing attention four: Spread the floor to adapt the floor to the indoor temperature to prevent "hot expansion and contraction" from causing trouble

The basic knowledge of heat expansion and contraction may all be known, but in the decoration may not be so much attention. Manager Wang reminded: “When you shop floors, you have to consider this issue. Most brands of warehouses do not have heating equipment, so there will be shrinkage in the wood. Therefore, when the floor is shipped home, it must be It will take a day or two to allow the wood to adapt to the temperature of the home and then begin laying the floor so that there will be no distortion or cracking of the floor due to an excessive temperature difference."

However, this is not enough. Because of the poor temperature in the four seasons, in order to prevent the phenomenon of thermal expansion in summer, when laying floors in the winter, care should be taken to keep the gaps larger to prevent possible “hot bulging” hazards in the summer.

Season decoration Three trees paint entrance decoration paint cement interior decoration heating home improvement floor tile cottage

BS4504 Flanges

We offer a complete range of BS4504 table flanges for use with OD tube and nominal bore pipe in carbon steel and stainless steel to tables D, E, F, and H. Specials can be manufactured to customers' special requirements. We offer a range of ASA 150LB raised face, weld neck, blind and slip-on flanges in grades A105, Q235 and 304, 316 to ASTM A182 specification.

BS4504 Flanges,BS4504 Threaded Flanges,Hub Pipe Flanges,Screwed Flange

Shandong Zhongnuo Heavy Industry Co.,Ltd. , https://www.zhongnuoflanges.com