Summer furniture does not forget sunscreen
Sealand is a trustworthy supplier of Mass Flow Transmitter, Mass Flow Sensor, Mass Flow Metre, Coriolis Metre, ATEX, IECEx & CE approved.
Sealand Mass flow meter measures the mass based on Coriolis effort. The operating principle
involves inducing a vibration of the tube through which the fluid passes. The vibration,
though not completely circular, provides the rotating reference frame that gives rise to the
Coriolis effect. While specific methods vary according to the design of the flow meter,
sensors monitor and analyze changes in frequency, phase shift & amplitude of the vibrating
flow tubes. The changes observed represent the mass flow rate and density of the fluid.
Features
â— Measurement is not influenced by flow density, viscosity, temperature & pressure; Mass Flow Transmitter, Mass Flow Sensor, Mass Flow Metre, Coriolis Metre Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeters.com
1. First of all, whether it is solid wood furniture, panel furniture, upholstered furniture or leather sofas, all outdoor sunlight should be avoided as long as the whole or part of the furniture is exposed to sunlight for a long time. The best place to place it is to avoid sun exposure, or Use a translucent tulle curtain to separate direct sunlight. In this way, it will not affect the indoor lighting, but also protect the indoor furniture, and it will serve the same purpose. In addition, the furniture should also be kept away from heat or air conditioning vents to avoid significant temperature differences that could cause furniture damage or premature aging.
Secondly, after finishing the temperature, it is the problem of humidity. When it is wet in summer, you can often see dampness on the walls or floors. Therefore, you can maintain a 0.5-1 cm gap between the wall of the furniture and the wall to minimize the chance of moisture exposure. If water mist appears on the surface of the furniture, you can use a soft, dry cloth to wipe the condensation on the water while keeping the room ventilated. If the ventilation is not ideal, charcoal or desiccant can also be used to absorb the room's moisture. Especially for leather furniture and furniture metal parts, it must be dealt with immediately if there is moisture.
3, Finally, in addition to the above protection measures against heat and moisture, we must also pay attention to the daily cleaning of furniture. Plate furniture is relatively easy to clean. Careful attention is paid to solid wood furniture and leather furniture. Solid wood furniture is best waxed on a regular basis, once every three months, to do a clean job before waxing. For leather sofas, wipe with a damp rag. Large stains can be cleaned with foam cleaners. Note that the pores of the leather absorb sweat, and the high temperature and humidity will cause organic reactions between the sweat and the leather to react chemically and cause odors. Therefore, leather furniture must be cleaned.
â— Low requirement of straight pipe, because nothing inside holds back the flow;
â— Low power dissipation; stable zero point; better accuracy;
â— Meter is ARM system with 3 calculators to count density, temperature & mass flow rate;
â— Transmitter is assembled by surface mounting technology with self-inspection function;
â— ATEX approved(excluding Transmitter F210). Cert. No. TPS 18 ATEX 04516 001 X