Paint coating acceptance work: a knock on it
With the continuous improvement of people’s living standards, the selection of wall tiles and paints in residential decoration has become more frequent and more advanced. Right now, whether it is the price of tiles and floor tiles or paints and labor costs are rising rapidly, it has also become the bulk of spending on residential renovations. In order to avoid cost problems in the above-mentioned renovations, many of my friends would like to know how to carry out the inspection and acceptance work for wall tile inlays and paints. Tiles, tiles, and paints are commonly referred to as “face†projects and may be checked by visual inspection and feel after renovation. Wall tile mosaic acceptance mainly remember 8 words: a knock, a look, a touch, a splash, the following one by one: A knock - gently tap the wall and the ground in order to prevent the occurrence of "empty drums" on the wall and the ground. This is a taboo for the quality of the wall and the floor. If the sound of the tap is dull, it means that the inlay is more solid. On the contrary, if a “squeak†sound is issued, it indicates that the tiles are not firmly attached. This is not only a matter of construction quality, but it even affects the safety of human life. It must be knocked off and revisited immediately. A look - directly observe the color of the wall tiles and paint paint, to see if the color is soft, especially if there is no color. Here are a few tips for the audience. When the tile is shipped, check the color number on the product packaging label. Please note that the color number on the mark must be the same, otherwise it may be chromatic aberration. Touch - touch on the wall and floor that has been plastered, and feel if the tiles are uneven. Special attention should be paid to whether the caulking between the tiles is smooth and compact, otherwise the tiles will not be firm and even leaking. One splash - splashing water on the floor and walls that have been laid, mainly checking two things. One is to see whether the surface water flows quickly, and the other is to see if the floor surface is leaking. If there is still water on the ground after splashing water, it means that the ground does not have an inclined slope, which is obviously a construction quality problem. When checking the ground for leakage, it is advisable to splash water several times and watch for some time after splashing water. Construction acceptance floor paint paint paint residential door price Bidet Seat,Toilet Seat Cover,Bidet Toilet Seats,Toilet Seat Guangdong Fabia Intelligent Technology Co., Ltd , https://www.smartfabia.com