Old house renovation four strokes to solve the ground problem

The old house is to be refurbished, and in addition to the mottled walls, it must be re-brushed, and there must be no resurrection of the original ground. Then how do you want to refurbish the tiles? What should you pay attention to during the construction process?

There are three conditions for the renovation of old houses. One is to scrape off the original floor tiles. One is to put new floor tiles directly on the surface of the old floor tiles, and the other is to keep the intact floor tiles only to replace the broken bricks. .

Eradicating old tiles

A few of the tiles that have been worn for more than a decade or even decades are intact. Most of the enamel on the surface of the tile has been seriously worn and dirty, and it is not enough to replace it. Some designs of floor tiles can't find the same models and styles nowadays, so once you change them, you can only shovel out the original floor tiles and re-tiling.

Old brick paved with new bricks

If the original floor tiles are relatively thin, and you feel that the work of removing the floor tiles is too cumbersome, you may consider directly laying new floor tiles directly on the old floor tiles. Tile surface treatment agent, tile/mosaic adhesive on the surface of the old tile, and then spread the new floor tile to save a lot of time and energy

Keep old floor tiles

If the color of the floor tiles in the home is not particularly outstanding, and you can find the same type of floor tiles in the market, then you only need to scrape the bricks that have been seriously worn out and shattered. You can basically do nothing without moving. However, the brick must be removed and re-doed, because it takes too long to use, there are a lot of bacteria and dirt, must be re-tacking, and the re-hatch after the floor tiles will look more beautiful.

Old floor tiles on the floor

This method is relatively few people to do, if you want to try it, you need to thoroughly clean the original ground, disinfect and then spread the floor, otherwise the floor will grow bacteria and microbes. As the flooring is directly laid on the floor tiles, the height difference between the ground and the door will have a direct impact on the height of the door. Therefore, this method should be carefully considered.

Tips: More practical decoration knowledge, real scene with the shoot, please pay attention to the palm of this site (micro signal: mall_jia).

Tile Tile Tile Tile Tile Maintenance

Solar Light

Solar Light,Solar Wall Light,Lithium Portable Solar Power Station,Outdoor Solar Flood Light

JIANGMEN MOSCOT OPTOELECTRONIC TECHNOLOGY CO.,LTD. , https://www.jmsensorsled.com