Analysis and preventive measures for the main reasons why solar street lights are not bright
Hunan Solar Hunan Hot Water Project Changsha Solar Hunan Solar Street Light Changsha Hot Water Project Changsha Solar Street Light
Especially with the emergence of microprocessors and the continuous improvement of industrial automation technology, load cells have become a necessary device in process control.
From the weight measurement of large tanks and hoppers that could not be weighed before, and the measurement and control of crane scales, automobile scales, etc., to the batching system for mixing and distributing a variety of raw materials, automatic detection in the production process, and control of the powder and granular material feed volume, etc., Have applied the load cell.
At present, load cells are mainly used in various electronic weighing instruments, industrial control fields, online control, installation overload alarms, material testing machines, and other fields, such as electronic truck scales, electronic platform scales, electronic forklifts, dynamic axle load scales, electronic hook scales, etc., Electronic pricing scales, electronic steel scales, electronic rail scales, hopper scales, batching scales, filling scales, etc.
[Hunan Solar Street Light] When configuring Hunan solar street light, first understand the local lighting conditions, road width and street light height and other related information, and then choose a street light with a height suitable for the lamp head, so that the power of the street light can be The number of rainy days in the area is compatible with the capacity of the battery, so that the street lights can be configured to avoid some phenomena such as the street lights are not bright.
The reason for the lack of light:
1. Due to the small power configuration of the solar panel, the battery is not fully charged, which makes the initial performance suitable. However, after several rainy weather, the light begins to darken, and it takes almost less than a year. Not bright, this reason is the most common.
2. The capacity of the battery is too small, or the setting of the solar street light controller does not meet the local demand, resulting in the number of days that the rainy days cannot reach. This situation is easy to occur in the case of a lot of rainy days. This situation will give The battery brings a certain burden, causing the battery to age prematurely.
3. If the power used by the led lamp head of Hunan solar street light is too large, the battery may be over-discharged and prematurely aged. If the power is too small, insufficient brightness will result in unnecessary waste of cost.
Precaution:
1. If it is an unprofessional company or a non-professional person to design and install, it may cause the above three phenomena to occur, resulting in a paralyzed street lamp system, which greatly reduces the service life of the street lamp.
2. When installing the Hunan solar street light, be sure to pay attention to these reasons in advance.
Contact phone address: Yuhua District, Changsha City, Yuhua Electromechanical "target=_blank> Electrical and Mechanical Market D District 7 Building No. 126 This article Source: Hunan Solar Street Light Hunan Solar http://China Hardware Business Network http://news.chinawj.com .cn 
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
load cell for hopper scales, load cell for industrial use, load cell for automatic detection
Zhejiang Nanhua Electronic Technology Co., Ltd , https://www.nhloadcells.com