Renishaw advanced machine tool precision detection technology introduction (3)
The software can automatically display the actual feed of the machine under test in real-time during the data acquisition process, and warn of possible test parameter errors. In order to adapt to the needs of different levels of operators, the software uses a variety of working modes. For most machine operators in the workshop, the instrument knowledge and computer operation level are limited, and the machine objects to be maintained are relatively fixed, so it is necessary to simplify the operation steps as much as possible, so it is specially set for this type of user. An “operator modeâ€: For many researchers in colleges and universities, machine tool research institutions, the requirements for ballbars will be higher, and Renishaw has more features for this type of users, and it is widely used. The popular XML-compliant data format is used to expand its application area. The "advanced mode" is set for this type of user: for the quality inspection department of all kinds of CNC machine tools, equipment modification and maintenance services, etc., due to the type of machine tool being tested Uncertain, the test parameter settings are different, so the "quick mode" is set for this type of application. Previous page
Experience has shown that more than 80% of machine tools must be tuned in the field to meet their specifications. Therefore, in the acceptance of the new machine tool, the verification is carried out so that the machine can be installed at the beginning to ensure that its technical specifications and expected quality and efficiency are achieved. In addition, experience has also shown that 80% of the machine tools that have been put into production use are in an abnormally high performance state after a period of use, even exceeding their potential bearing capacity. Therefore, the new machine tool usually needs to be verified again after half a year of use, and then it can be checked once a year. Regularly checking the machine tool error and correcting the pitch and backlash in time can improve the accuracy of the machine tool in production and use, improve the processing quality of the parts, and rationally distribute the production scheduling and machine tool processing tasks, so as not to produce waste products and greatly improve the machine tool utilization rate. In short, the use of the latest CNC machine tool standards, relying on advanced "health" maintenance experts, timely reveal CNC machine tool problems, can avoid excessive loss of machine tool accuracy and destructive use of machine tools, resulting in more ideal production benefits.