2018 Hot Sale Tungsten High Heavy Alloy Parts Products

October 24, 2018

Model NO.: W alloy
Surface: Machined or Ground
Trademark: Huapei
Transport Package: Standardexported Plywood Case Outside
Specification: diameter1.5-200mm*L<500mm
Origin: China
HS Code: 81019990
Model NO.: W alloy
Surface: Machined or Ground
Trademark: Huapei
Transport Package: Standardexported Plywood Case Outside
Specification: diameter1.5-200mm*L<500mm
Origin: China
HS Code: 81019990
High Quality Tungsten High Heavy Alloy ASTM B777-07 rods/sheet/tubes

Material:W90-97NiFe(Magnetic)&W90-97NiCu(Nonmagnetic)
Density:16.8-18.8g/cm3
  • High density (up to 65% denser than Lead). 
  • Denser materials exist (, pure Tungsten, Gold, platinum group metals) but their use is restricted by availability, workability and cost. 
  • Providing mass where volume space is limited. 
  • Concentrated weight essential where accuracy is required in placement of mass. 
  • Placement of weight in situations where airflow has a significant impact. 
Machinability 
  • Possible, either to press components to shape, or to cut and shape material prior to sintering. 
  • Reducing the amount of final machining necessary to produce the finished component. 
  • Can be machined conventionally and without much difficulty. 
Production Method 
  • Blending of tungsten powder with other metal powders and a bonding agent, cooling and sieving. 
  • Pressing the blended powder to the required shape (allowing for shrinkage during the final processing), and shaping the green part component. 
  • Pre-sintering the pressed components to remove the bonding agent. 
  • Final sintering in the hydrogen fed furnace to fuse the powder particles together. 
  • Supplied in bar, square, round and rectangle sizes are available in rough oversize, or turned or ground to exact requirements. Components can also be produced to customer drawings. 
Thermal Properties 
  • High softening temperature. 
  • Low thermal conductivity and low coefficient of expansion gives the material a high resistance to thermal fatigue. 
  • Excellent soldering erosion resistance to molten aluminium. 
  • Strong at high temperatures with high thermal stability. 

high grade Tungsten high heavy alloy AMST 21014 class 3(another expression)   
        - Material: W90-97NiFe(Magnetic) & W90-97NiCu(Nonmagnetic)
        - Density:16.8-18.8g/cm3
        - Rods Size:dia(1.5 -200) x Length<500mm  
         Plate size: 0.1min Thickness*W*L

Property of tungsten alloy

AMST 21014 class 1
90%WNiFe, 90%WNiCu
Density : 17.0
Hardness: 32HRC max
Elongation: 5-20%

AMST 21014 class 2
92.5%WNiFe, 92.5%WNiCu
Density : 17.2
Hardness: 33HRC max
Elongation: 5-15%

AMST 21014 class 3
95%WNiFe, W95NiCu
Density : 18.0
Hardness: 34HRC max
Elongation: 3-10%

AMST 21014 class 4
97.5%WNiFe, W97.5NiCu
Density : 18.85
Hardness: 35HRC max
Elongation: 1-8%

Mechanical Properties 

  • High Young's modulus of elasticity. Does not creep when experiencing significant forces, unlike Lead. 
  • Despite their strength, they remain ductile and resistant to cracking. 
  • The hardness range of the alloys is typically 20-35 Hardness HRC. 
Tungsten Alloys  
 
EFI Grade EF17 EF175 EF18 EF185
ASTM B 777-07 1 2 3 4
Weight %  Tungsten 90 92.5 95 97
Nominal Density GM/CC 17.00 17.50 18.00 18.50
Minimum* Ultimate Tensile Strength UTS (KSI) 110 110 105 100
Minimum* Elongation % 5 5 3 2
Modulus of Elasticity (KSI) 45,000 48,000 50,000 52,000

Tungsten high heavy aloy applications:
      - Balancing weights
 
      - Electroheat upsetting anvil block
      - Balls in bomb
      - High voltage electrical contact

Our Standard and safe Packing
     -  paper wrapped the sheets, then plastic paper protected from moisture
     -  Foam board around the the inner wooden case
     -  Standard exported plywood case outside
 
Delivery time: 10-35days as your required qty.

Our relevant tungsten high heavy alloy products and packing photoes,hope you are interested in them
2018 Hot Sale Tungsten High Heavy Alloy Parts Products
2018 Hot Sale Tungsten High Heavy Alloy Parts Products
 




  High Quality Tungsten High Heavy Alloy ASTM B777-07 rods/sheet/tubes

Material:W90-97NiFe(Magnetic)&W90-97NiCu(Nonmagnetic)
Density:16.8-18.8g/cm3
  • High density (up to 65% denser than Lead). 
  • Denser materials exist (, pure Tungsten, Gold, platinum group metals) but their use is restricted by availability, workability and cost. 
  • Providing mass where volume space is limited. 
  • Concentrated weight essential where accuracy is required in placement of mass. 
  • Placement of weight in situations where airflow has a significant impact. 
Machinability 
  • Possible, either to press components to shape, or to cut and shape material prior to sintering. 
  • Reducing the amount of final machining necessary to produce the finished component. 
  • Can be machined conventionally and without much difficulty. 
Production Method 
  • Blending of tungsten powder with other metal powders and a bonding agent, cooling and sieving. 
  • Pressing the blended powder to the required shape (allowing for shrinkage during the final processing), and shaping the green part component. 
  • Pre-sintering the pressed components to remove the bonding agent. 
  • Final sintering in the hydrogen fed furnace to fuse the powder particles together. 
  • Supplied in bar, square, round and rectangle sizes are available in rough oversize, or turned or ground to exact requirements. Components can also be produced to customer drawings. 
Thermal Properties 
  • High softening temperature. 
  • Low thermal conductivity and low coefficient of expansion gives the material a high resistance to thermal fatigue. 
  • Excellent soldering erosion resistance to molten aluminium. 
  • Strong at high temperatures with high thermal stability. 

high grade Tungsten high heavy alloy AMST 21014 class 3(another expression)   
        - Material: W90-97NiFe(Magnetic) & W90-97NiCu(Nonmagnetic)
        - Density:16.8-18.8g/cm3
        - Rods Size:dia(1.5 -200) x Length<500mm  
         Plate size: 0.1min Thickness*W*L

Property of tungsten alloy

AMST 21014 class 1
90%WNiFe, 90%WNiCu
Density : 17.0
Hardness: 32HRC max
Elongation: 5-20%

AMST 21014 class 2
92.5%WNiFe, 92.5%WNiCu
Density : 17.2
Hardness: 33HRC max
Elongation: 5-15%

AMST 21014 class 3
95%WNiFe, W95NiCu
Density : 18.0
Hardness: 34HRC max
Elongation: 3-10%

AMST 21014 class 4
97.5%WNiFe, W97.5NiCu
Density : 18.85
Hardness: 35HRC max
Elongation: 1-8%

Mechanical Properties 

  • High Young's modulus of elasticity. Does not creep when experiencing significant forces, unlike Lead. 
  • Despite their strength, they remain ductile and resistant to cracking. 
  • The hardness range of the alloys is typically 20-35 Hardness HRC. 
Tungsten Alloys  
 
EFI Grade EF17 EF175 EF18 EF185
ASTM B 777-07 1 2 3 4
Weight %  Tungsten 90 92.5 95 97
Nominal Density GM/CC 17.00 17.50 18.00 18.50
Minimum* Ultimate Tensile Strength UTS (KSI) 110 110 105 100
Minimum* Elongation % 5 5 3 2
Modulus of Elasticity (KSI) 45,000 48,000 50,000 52,000

Tungsten high heavy aloy applications:
      - Balancing weights
 
      - Electroheat upsetting anvil block
      - Balls in bomb
      - High voltage electrical contact

Our Standard and safe Packing
     -  paper wrapped the sheets, then plastic paper protected from moisture
     -  Foam board around the the inner wooden case
     -  Standard exported plywood case outside
 
Delivery time: 10-35days as your required qty.

Our relevant tungsten high heavy alloy products and packing photoes,hope you are interested in them
2018 Hot Sale Tungsten High Heavy Alloy Parts Products
2018 Hot Sale Tungsten High Heavy Alloy Parts Products
 




Â